Eleanor Schofield – Mary Rose Portsmouth
ML4106 data logger
Jon West, The Art of Meat owner
Part of the Hanwell Pro RL4000RHT Series, the RL4109 RH/T wireless data logger is fitted with onboard sensors and optional remote surface temperature probe.
Temperature ranges between -97.6°F to +291°F. (Probes sold separately)
The RL4512 is an external powered CO2 and Thermistor sensor with an internal battery to be used for setting up and downloading the data from the unit.
The CO2 is Channel 1 and Thermistor is Channel 2.
Part of the Flood Series, the RL4809 is a dual channel wireless data logger with 2 x 4-20mA input for use internally or externally. Each unit includes a steel bracket for mounting purposes.
The RL5021 wireless data logger has been specifically designed with dual measurement including CO2 and temperature. The units are in IP65-rated cases and are suitable for use in tough environments.
The air flow meter wireless data logger, RL4810, is designed specifically for use with the below specified high accuracy air flow sensors.
Air Flow ranges 0-16 ft. /s, 0-33 ft. /s, 0-66 ft. /s. (Probes sold separately)
Part of the AnoxiBug System, the Flexi containers are used to contain the relevant artifact during the process.
Available Containers: FlexiArt, FlexiCube, FlexiTube
For use with the AnoxiBug System, the AnoxiBug Humidity Stabilisers and Monitors are used to stabilise the humidity levels within an AnoxiBug container.
For use with the AnoxiBug System, the AnoxiBug Scavengers are used to remove the level of oxygen within the AnoxiBug container.
Available as 35oz.,17.6 oz. or 3.5 oz.
The AnoxiBug is a 100% effective anoxia pest control treatment, making it possible to eliminate insect pests from organic materials cost-effectively and efficiently.
Indicator, Wireless Data Logger and Wireless Data Logger with RH/T options available.
Part of the HL5000 range, the Climabox CO2 and RH/T kit includes all you need to accurately measure and log air quality.
Air Quality: CO2 range 0…4000ppm*, Temperature range 14°F to +140°F, Humidity range 0-100%RH
Part of the RL5000 range, the Climabox CO2 and RH/T wireless data loggers can be used with a Hanwell system to accurately measure and log air quality data.
Hanwell Pro CR3 controller base station, complete with software, 457 MHz frequency radio receiver, power supply and connecting cables.
The Hanwell EMS software can be used with both Hanwell Pro and Hanwell IceSpy hardware to provide intuitive tools for detailed data analysis and immediate alarm notification.
The Hanwell EMS software enables users access 24/7 from anywhere in the world – like no other.
The Hanwell Pro repeater with receiver is designed for use with the Hanwell EMS environmental monitoring system. Complete with power supply and wall mounting bracket.
For use with the AnoxiBug System, the Heat Sealer is used to create an effective seal on the AnoxiBug containers to ensure the container is air tight.
Part of the Hanwell HL4000T Series, the HL4001 (single channel) temperature data logger includes LCD display.
Temperature range of -40°F to +140°F. (Probes sold separately)
Part of the HL4000T Series, the HL4005 (Single channel) and HL4006 (Dual Channel) with 2K49 load resistor provides a high temperature measurement and includes LCD display and 2 Pin Lemo socket.
Temperature range of 32°F to +257°F. (Probes sold separately)
Part of the Hanwell Pro HL4000T Series, the HL4007 is a single channel data logger for temperature measurement with LCD display and fitted internal temperature sensor.
Temperature range -4°F to +140°F.
Choose your region below to see content specific to your location: