Cold Chain Transport System

The cold chain transport system can easily be used in conjunction with existing Hanwell IceSpy temperature systems used within distribution centres to generate a unique closed-loop wireless monitoring solution specifically for end to end cold chain protection.

Features

  • Complete cold chain audit trails from one system
  • Use standalone or with existing Hanwell IceSpy systems within distribution centres
  • Completely automated data collection
  • Temperature range: -30°C to +50°C
  • Transmitters log up to 1 or 4 days
  • User replaceable batteries
  • Built in mounting brackets
  • Complies with BS EN 12830
  • Complies with RoHS, EU directives and WEEE
  • Carries CE Marking

Benefits

  • Eliminates the need for retrospective data loggers
  • Removes the need for manual downloads and hassle of integration to other systems
  • Eliminates the time spent interacting with temperature hardware
  • Assists with reducing risk of potentially hazardous out-of-condition situations
  • Maintains product quality and company reputation
  • Reduces waste
  • Assists with HACCP, FDA, GMP and GDP compliance requirements

There are no reviews yet.

Be the first to review “Cold Chain Transport System”

How It Works
Before a vehicle leaves the distribution centre a wireless transmitter is attached to a pallet or lorry. Each transmitter will log temperature data at 10 minute intervals for up to 1 or 4 days (depending on requirements). On arrival either back at the same distribution centre or a store networked to the main system transmitters will immediately and automatically download data without the need for manual interception.

Transport Base

Dimensions: 195 x 148 x 45mm
Weight: 450g
Case Materials: ABS
IP Rating: IP53
Operating Temperature: 0°C to +40°C
Storage Temperature: -40°C to +85°C
Radio Frequency: 433-434MHz B and A,B and C frequency variances (Bases with the same letter cannot to be used in close proximity of each other)
Power Supply: 12VDC via external universal power supply. Power supply included. (Hanwell Solutions recommend only Hanwell approved power supplies stock code: G422)
Battery Back Up: None
Communications: TCP/IP Via RJ45 connector
LED indication: Red (Alarm) Yellow (Network Comms) Green (Power)

Note: Transport Bases will only operate with Hanwell IceSpy Transport transmitters

 

Transmitters

Frequency: 433-434MHz band Frequency hopping for greater security
Radio Power: Max 10mW, duty cycle >0.1%
Radio Range: 300mtrs over open ground
Software Required: Hanwell IceSpy
Case Material: ABS
Operating Temperature: -30°C to +50°C
Storage Temperature: -40°C to +85°C
Battery Life: Up to 1.5 years (depending on use)
Battery: 1.5V AA Lithium*1 1.5V AA Alkaline (Not recommended for use below -10°C) *2 *1 – Hanwell only recommend the approved and tested Energizer Ultimate LithiumL91 (Hanwell stock No. G301 *2 – Battery life will be reduced at low temperatures Duracell ID1500-10 (Hanwell stock No.88705)
Hardware Required: Transport Base Network Receiver (A,B or C frequency versions)
Logged Data: 1 or 4 day versions available Transmitters ‘wrap’ when the memory is full; over writing the oldest data with new logged data values.
Measure/log Interval: 10 minutes

Note: The transport system does not work with repeaters.